Full Automatic Edge Bander incline and straight for furniture Machinery/Woodworking Edge Banding Machine

When the board is wet or the weather is cold, the preheating function can be turned on to heat the board, which can improve the adhesion between the board and the edge banding, and make the adhesion strong

The glue pot heats the sol. After the glue is sufficiently melted, the glue is spread evenly on the plate and the edge band through a special conveying structure, and the edge band and the plate are presse

Through precise linear guide rail movement, the use of profiling automatic tracking and high-frequency high-speed motor structure to ensure smooth and smooth cut surface. This product is controlled by a TY

The rough cutting knife is a flat knife, which is used to trim the excess edge banding material on the upper and lower parts of the sheet edge band. The high-frequency and high-speed motor is used to reali

The fine cutting is an R-shaped knife, which is used to repair the excess edge banding material after rough trimming on the upper and lower parts of the processed sheet edge band, and at the same time make

Used to eliminate the ripple marks caused by the cutting process of the non-linear motion of the trimming

Use a cotton polishing wheel to polish and clean the processed plates, remove the excess glue between the edge band and the plate, and make the end face of the edge more natural and smooth.

The inner picture of the edge banding machine